DESCRIPTION:

• 1 X Ultimate-800 Portable Battery Box
• 1 X 10AMP DC-DC in car cig- socket smart battery charger
•        800W Built in Pure Sine Wave Inverter
•        
• 10A Dual Battery Management System Ready Solar Regulator And DC-DC Charging Point（Built-in Isolator）
• 1 X ANTPAK quick release mounting bracket kit
• Battery box Internal Dimension: approx 330(L) x 200(W) x 250mm(H)
• Battery Box External Dimension: approx 400(L) x 250(W) x 315mm(H)

Key Features:

•         Introduction Offer Ultimate-800
• A build-in 800W pure sine wave inverter
• On/Off Master Switch to prevent battery power loss
•       10AMP DC-DC charger via cig-ligher
• Free quick release mounting bracket kit
• Jump start battery via big currant terminals
• DC loads: 2x2.4A USB Charger,
• 2x Cigarette Socket
• 1x Merit socket,
• 1 x Engle socket,
• 1 x Anderson Plug
• Built in solar regulator
• Suits batteries up to 130AH**
• If you have existing isolator or battery management system, please plug in Anderson Plug

Whether you need portable power on the work site or a second battery to run the fridge, The battery box is the perfect solution. The Ultimate-800 provides 12V power, can be used as a 12V battery charger, battery management system, and a dual-battery system all in one. Enjoy portable power anywhere & anytime with our newest technology Ultimate-800 Powered Battery Box.

If you’ve got someone in the family who simply won’t leave home without their slice of technology, a built-in 800W pure sine wave inverter provides 240V power without the need to run an external inverter or additional cabling. Power is delivered through the 240V mains socket, 2x 12V cigar lighter ports,1x Merit socket, 1xEngle socket, 2x2.4A 5V USB ports, external high-current terminals or via the 50A Anderson plug, all of which can be used simultaneously.

The Ultimat-800 battery box is compatible with all 4WD batteries

Technical Information

***battery box specs according to actual model.

Technical Specs of DBMP

◆DBMP Specifications:

◆DPMP Features:

• The Ultimate-800 DPMP is a 12 Volts 10 Amp in-vehicle DC to DC charger designed for keep your auxiliary battery charged whilst driving or with portable solar panels when you are parked.  
• The system charges your auxiliary battery to their optimum levels, using multi-stage DC DC charging.
• The Ultimate-800 DPMP also features a DC to DC solar regulator, allowing you to deliver the maximum amount of power from your solar panels to your auxiliary battery.
• With multiple levels of fault protection. The smart charger will act as a dual battery isolator, should the voltage get too low, the start battery will be protected.
• Charges AGM, Gel, Calcium content, VRLA, Lithium Battery and Standard Lead Acid batteries
• The smart charger will act as a dual battery isolator, should the voltage get too low, the start battery will be protected.

Frequently Asked Questions

What batteries can be used?

It will charge most types of rechargeable 12V lead-acid type battery / Lithium LiFePO4 Battery 60 Ahr capacity up to 140Ahr. There are four main types of 12V lead acid battery - conventional wet lead-acid battery, calcium,lithium  AGM and gel. It can charge both cold cranking type car batteries and deep cycle batteries.

How do I charge?

Please refer to content ‘Getting Charged’ in the photos provided 

Is it waterproof?

No, care should be taken to shield it from direct sunlight and the elements.

How do I know if the battery is fully charged?

The Battery Level Icon is solid and not flashing, battery will is fully charged.

Can I leave the Ultimate-800 continually plugged in?

Yes, it will keep on float cycle. Usage is plug-and-play. The built-in battery management system prevents over-charging and over-discharging of batteries. The USB output will only supply the amount of power.